RaptorEye - V-Face
149,99 €
Standard product warranty is 6 months. TTC Expédition sous 1 à 3 jours ouvrés
Phare LED RaptorEye pour masque V-Face
Donnez à votre configuration V-Face un look plus racé et une meilleure visibilité grâce au phare LED RaptorEye. Conçu pour moto d’enduro, moto supermotard et moto cross, ce phare allie un design moderne et agressif à des fonctions d’éclairage pratiques pour la route et le tout-terrain.
Le RaptorEye dispose d’un feu de route, d’un feu de croisement et d’un feu de position, vous offrant ainsi les modes d’éclairage indispensables pour la conduite quotidienne, les sorties nocturnes et moto customisées. Grâce à sa lumière LED blanche brillante de 6 000 K, il confère à l’avant de votre moto un look épuré et moderne tout en améliorant la visibilité par rapport aux configurations halogènes de base.
Le modèle d’origine est homologué E, dispose d’une alimentation 12 V CC, d’un boîtier en aluminium moulé sous pression et d’une lentille extérieure en PC.
Puissance théorique :40 W en feux de route / 30 W en feux de croisement / 4,8 W en feux de position
Flux lumineux théorique :2 476 lm en feux de route / 1 251 lm en feux de croisement / 310 lm en feux de position
Current consumption: 2,15 A
Compatibilité : universelle – livré avec un connecteur standard KTM/HSQ/GasGas à 4 broches
Ce phare doit être alimenté en courant continu (CC) 12 V. moto équipées d’un carburateur fonctionnent en courant alternatif (CA), ce qui endommagerait le phare ! Pour alimenter le phare en 12 V CC, achetez le câblage de batterie Movetronix ou un convertisseur CA/CC (si vous n’avez pas de batterie).
Le cache-phare n'est pas inclus !!
Achetez le cache-phare en plastique ici : Cache V-Face
RE_V
50cc → Not compatible (new AC/DC Converter for 50cc bikes available soon)
Bikes with battery (carbureted) → Purchase our Battery Wiring.
Bikes with battery (fuel-injected) → Plug & Play installation. (50cc models not compatible)
Bikes without battery (only certain models) → With our AC/DC Converter (only for Loccis Eye 3.1, 3.0, 1.0, Raptor Eye [except PRO], and X-Beam).
Locciseye 3.0, 3.1, 1.0
Raptor Eye (Not Pro versions)
X-Beam (All Models)
OEM Headlights
Take photos of the product and packaging and contact us within 7 days. We will arrange replacement or refund.
All our Headlights require 12 DC Current to work.
50cc → Not compatible (new AC/DC Converter for 50cc bikes available soon)
Bikes with battery (carbureted) → Purchase our Battery Wiring,
Except Beta 125 4T LC and Sherco 125 2T à Plug and play.
Bikes with battery (fuel-injected) → Plug & Play installation. (50cc models not compatible)
Bikes without battery (only certain models) → With our AC/DC Converter (only for Loccis Eye 3.1, 3.0, 1.0, Raptor Eye [except PRO], and X-Beam).
NO, BUT IF YOU HAVE A 50CC BIKE WITH A BATTERY YOU CAN CONNECT THE HEADLIGHT WITH OUR BATTERY WIRING.
Attention! Due to it’s power limitation, it cannot be used with any 4.0 Headlight, HexBeam and RaptorEye PRO Headlights.
It is only compatible with:
Soon Movetronix will launch a New AC/DC Converter that can handle all the Movetronix Headlights Plug and Play!
1. If the headlight has never worked, you probably just need to check and change toe position of the wires in the connector of the headlight, as your bike maybe has a different pin layout in the connector than others. If it still not works, you need to make sure that you have purchased and always used the Add-On Products that are required for your bike. If you don´t manage to make your product work then contact our customer support.
2. The product stopped working or is not working correctly: Just Unpin the pins from the connector and test the product directly on a 12V Battery (the orange slip on the headlight shows the function of every cable depending on its color). If High beam or RGB does not work, contact our support centre by telling Order Number and explaining what has happened.
Standard Warranty is 6 months, it covers all the electrical components of the headlight in case of malfunctioning or failure that are directly connected to the manufacturing process. Any modification to the wiring, removal of the back cover or unauthorized modifications voids warranty. Our Headlights are hand made and small imperfections are unavoidable.
There is the possibility to purchase the Extended Warranty on the Headlight, that extends the mentioned warranty from 6 months to 12 months starting from the date of purchase.
Fréquemment achetés ensemble
Produits de la même catégorie
Fits your bike
Top of the line
