2x RGBW LED Strips are added additionally, since the Controller has 4 Outputs, everything will be plug & play!
- -25%
RGB SeatGlow
€130.00
€97.50
Save 25%
Shipped out within 1-3 days
BEST SELLING PRODUCT
Plug & Play RGB Seat Illumination
Get ready to light up the streets with the Movetronix RGB SeatGlow, the first-ever PLUG & PLAY RGB Seat Illumination with extended compatibility for Supermoto enthusiasts with a battery!
Powered by Movetronix's brand new GlowSync Ecosystem, this RGB SeatGlow syncs seamlessly with your Loccis Eye 4.0, 3.1 or HexBeam RGB Headlight, letting you control all your lights from one app.
It’s fully future-proof, ready to connect with all upcoming GlowSync products.
Be part of the trend seen all over TikTok and Instagram; this is the ultimate finishing touch to make your custom bike build unforgettable!
Features:
Note: This product is directly attached to a 12V battery with its specific terminals. This product does not comply with public traffic regulations and cannot be used legally on public roads. For racing use only!
Verify before you buy: Your bike needs at least 5mm of space between seat and plastics.
PRO-TIP: If your seat does not have enough space below, slightly unscrew the big bolt that holds your seat on the fueltank to provide more space.
Includes:
- 2x Premium Waterproof RGBW LED Strips
- 1x Universal GlowSync controller system (with 4 outputs for future compatibility).
- 1x Controller Mounting Case
- 2x Pre-Adhesive Cleaner
- 6x Cable Ties for installation
- "Movetronix" & "Ride With Style" Stickers
- Installation instructions
Ride bright, ride wild, and stand out like the pros!
SG-80
-
50cc → Not compatible (new AC/DC Converter for 50cc bikes available soon)
-
Bikes with battery (carbureted) → Purchase our Battery Wiring.
-
Bikes with battery (fuel-injected) → Plug & Play installation. (50cc models not compatible)
-
Bikes without battery (only certain models) → With our AC/DC Converter (only for Loccis Eye 3.1, 3.0, 1.0, Raptor Eye [except PRO], and X-Beam).
-
Unmount your original headlight mask.
-
Use the provided screws to gently install your new Movetronix headlight.
-
Connect the wiring:
-
To the AC/DC Converter output (if used) or the Battery Wiring (if carbureted with battery), or
-
Directly to the bike if it’s fuel-injected with a battery.
-
Locciseye 3.0, 3.1, 1.0
-
Raptor Eye (Not Pro versions)
-
X-Beam (All Models)
-
OEM Headlights
-
1.0 → first generation, white-only Angel Eye, the original design, less strong high beam then 4.0
-
3.0 → first RGB model, monochrome, standard high-beam, can be used with AC/DC Converter
-
3.1 → Advanced multi-color RGBW Ring (4.0), true white LED channel, standard-high-beam, can be used with AC/DC Converter
-
4.0 → same 3.1 RGBW ring, newest technology, Super-strong high-Beam (40W), integrated fan-ventilation system, need to be powered over battery.
-
HexBeam → same features as 4.0, new aggressive Hexagonal Design
-
Heart version: Available on request à We can produce it for your bike on request
All our Headlights require 12 DC Current to work.
50cc → Not compatible (new AC/DC Converter for 50cc bikes available soon)
Bikes with battery (carbureted) → Purchase our Battery Wiring,
Except Beta 125 4T LC and Sherco 125 2T à Plug and play.
Bikes with battery (fuel-injected) → Plug & Play installation. (50cc models not compatible)
Bikes without battery (only certain models) → With our AC/DC Converter (only for Loccis Eye 3.1, 3.0, 1.0, Raptor Eye [except PRO], and X-Beam).
Installation steps:
If your headlight is RGB, scan the QR code on the box, install the app, and enjoy!
NO, BUT IF YOU HAVE A 50CC BIKE WITH A BATTERY YOU CAN CONNECT THE HEADLIGHT WITH OUR BATTERY WIRING.
Attention! Due to it’s power limitation, it cannot be used with any 4.0 Headlight, HexBeam and RaptorEye PRO Headlights.
It is only compatible with:
Soon Movetronix will launch a New AC/DC Converter that can handle all the Movetronix Headlights Plug and Play!
1. If the headlight has never worked, you probably just need to check and change toe position of the wires in the connector of the headlight, as your bike maybe has a different pin layout in the connector than others. If it still not works, you need to make sure that you have purchased and always used the Add-On Products that are required for your bike. If you don´t manage to make your product work then contact our customer support.
2. The product stopped working or is not working correctly: Just Unpin the pins from the connector and test the product directly on a 12V Battery (the orange slip on the headlight shows the function of every cable depending on its color). If High beam or RGB does not work, contact our support centre by telling Order Number and explaining what has happened.
Standard Warranty is 6 months, it covers all the electrical components of the headlight in case of malfunctioning or failure that are directly connected to the manufacturing process. Any modification to the wiring, removal of the back cover or unauthorized modifications voids warranty. Our Headlights are hand made and small imperfections are unavoidable.
There is the possibility to purchase the Extended Warranty on the Headlight, that extends the mentioned warranty from 6 months to 12 months starting from the date of purchase.
You might also like
Top of the line
-
Frequently purchased together
-
Products from the same category
-
Fits your bike
BEST SELLING PRODUCT
Plug & Play RGB Seat Illumination