Is the Headlight compatible with my bike?

All our Headlights require 12 DC Current to work. 

  • 50cc → Not compatible (new AC/DC Converter for 50cc bikes available soon) 

  • Bikes with battery (carbureted) → Purchase our Battery Wiring. 

  • Bikes with battery (fuel-injected) → Plug & Play installation. (50cc models not compatible) 

  • Bikes without battery (only certain models) → With our AC/DC Converter (only for Loccis Eye 3.1, 3.0, 1.0, Raptor Eye [except PRO], and X-Beam).

FAQs From Same Category

How do I install the headlight?

50cc → Not compatible (new AC/DC Converter for 50cc bikes available soon) 

Bikes with battery (carbureted) → Purchase our Battery Wiring,  

Except Beta 125 4T LC and Sherco 125 2T à Plug and play. 

Bikes with battery (fuel-injected) → Plug & Play installation. (50cc models not compatible) 

Bikes without battery (only certain models) → With our AC/DC Converter (only for Loccis Eye 3.1, 3.0, 1.0, Raptor Eye [except PRO], and X-Beam). 

Installation steps:  Unmount your original headlight mask.  Use the provided screws to gently install your new Movetronix headlight.  Connect the wiring:  To the AC/DC Converter output (if used) or the Battery Wiring . . .

Scan the QR Code on the rear of the product box and install the App, Make sure your RGB Headlight is powered on. Turn on Bluetooth  and allow location tracking for the App. Open the top left menu and click on the Device called “FS0002” or “FS0003”. 

You are now successfully connected! 

You can also change the name of the Device by unnaming FS0003 to “Locciseye of Max” or “Locciseye KTM 450”. 

Our Headlights also have the possibility to connect to a few headlights at the same time, in order to control all the bikes at once, leading to cool videos.  

This is called GROUP MODE!

I HAVE A 50 CC BIKE CAN I USE YOUR HEADLIGHTS?

NO, BUT IF YOU HAVE A 50CC BIKE WITH A BATTERY YOU CAN CONNECT THE HEADLIGHT WITH OUR BATTERY WIRING.